Today most people know what GPS is, and many who use GPS vehicle tracking Australia have access to the technology through their smartphones. Presently GPS systems include 30 satellites that orbit the Earth and are capable of sending signals to the ground. Different devices have GPS receivers that work on software (apps) or firmware. These devices help drivers with navigation, direction, tracking, and so much more.
1. GPS vehicle tracking
You can get a GPS tracking device installed in any vehicle. These devices look like plastic boxes that have electronics such as a GPS receiver, mobile phone system transmitter, and others. The tracker can calculate the car’s current location through mobile phone networks on 3G/4G frequencies. The tracking device supplier programmes the messages. Every 3 minutes, the current location log gets transmitted while the vehicle is in motion and when it is parked every half an hour. The mobile phone tower nearest receives the location of the car and sends the information through the Internet. Once transmitted through the Internet, the site of the vehicle is securely accessed.
2. Other transmitted data
Other data transmitted through GPS vehicle tracking Australia is the latitude and longitude of the present GPS location. The speed records in kilometres or miles per hour. All of the engine data include; oil temperature, fuel level, and RPM.
3. GPS vehicle tracking installation
GPS trackers are easily installed in any vehicle. There are two main types of tracking devices available hardwired tracker models and trackers that are plug-in models and connect to an existing socket in your car.
4. Hardwire GPS vehicle tracking device
This system has wires that are connected to the vehicle’s electrical system. This makes for a more reliable power connection, and the tracking device can be hidden out of sight. Hardwire devices usually come with a better GPS antenna, so they give more accurate locations. These devices are connected to the vehicle’s alarm, ignition, and other input and output sources. For installation, they only require three wires – power, ground, and ignition.
5. Plug-in GPS vehicle tracking device
This kind of tracking device requires access to power, so it gets attached through the cigarette lighter using 12-volt power or through the vehicle’s diagnostic port or OBD. Unfortunately, the cigarette socket makes the device very visible, so it is not a reasonable consideration. The OBD port is the best option as a source of power for the tracking device. Once installed, the plug-in tracking device is ready for you in under 2 minutes. It can easily be moved from car to car and installed as required,
Choosing a GPS vehicle tracking device for your car depends on whether you want it to remain in the car you are driving or if you plan on sharing the device with other cars that you own. Usually, a GPS vehicle tracking device is simple to use and install, but you can check about the installation with your car mechanic before you attach it to your car. A hardwire device should be installed if it is not going to be moved and used for one vehicle. If you have more than one car in the family, then your best option is the plug-in device, which you can easily share among vehicles.
Check out GPS vehicle tracking by Fleet Complete. Contact their representatives to find out more about their system and technology.